03-18-2020 02:01 PM
Hello, I want to enter a debian server that I have connected in my work, I want to enter via SSH, but I do not know how I have to activate the firewal so that it allows me to enter from the public IP to the IP of said server with port 22.
I hope you can help me. Thank you.
Solved! Go to Solution.
03-18-2020 02:20 PM - edited 03-18-2020 02:21 PM
have you read this post :
here is the reference guide to setup static NAT one to One
you can also look PAT
03-18-2020 02:03 PM
here is the reference guide to setup static NAT one to One
03-18-2020 02:10 PM - edited 03-18-2020 02:17 PM
Hello, thanks for answering.
It is not what I am looking for, I am needing to enable that I can enter outside my company via SSH to a debian server.
Inside the company I enter via SSH to the server using the private IP that it has, but outside, using the Public IP I cannot.
It must be an access rule configuration or some ports.
03-18-2020 02:16 PM
if no other inside server available you like only 1 Server to access inside, you can do NAT 1to1
if you have more than one you can do PAT.
03-18-2020 02:18 PM
Hello, thanks for answering.
It is not what I am looking for, I am needing to enable that I can enter outside my company via SSH to a debian server.
Inside the company I enter via SSH to the server using the private IP that it has, but outside, using the Public IP I cannot.
It must be an access rule configuration or some ports.
03-18-2020 02:20 PM - edited 03-18-2020 02:21 PM
have you read this post :
here is the reference guide to setup static NAT one to One
you can also look PAT
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide