Cannot view LAN resources

[ITeamPaul]

I can connect via VPN with the QVPN but once I am connected to my network I cannot view the resources available to me by LAN. I am nowhere near aware as to why.

Please help.

[rmanthey]

Hello Paul,

If you are connect via VPN and can ping the routers LAN IP but not the internal resources there are two main reasons for this symptom.

1- Default gateway of those clients pointing to a different router other than the QVPN router.

2- OS' firewall or 3rd party firewall blocking subnets other than its own.

Cisco Small Business Support Center

Randy Manthey

CCNA, CCNA - Security

[ITeamPaul]

I am able to ping the LAN address of the router as well as login to its BIOS.

There is only one server that I need to access with a shared drive on it, so how would I see if the client is pointing to a different router? (which I assume it isn't since I can access it?)

And I have created rules to allow for ISPECv4 traffic within windows firewall and my 3rd party is allowing VPN traffic so how would I diagnose your second reason.

[rmanthey]

Paul,

try this link it might help configure the windows enviroment.

https://supportforums.cisco.com/message/3619588#3619588

hope this helps,

Cisco Small Business Support Center

Randy Manthey

CCNA, CCNA - Security

[ITeamPaul]

That link brings me right back here