Routers - Small Business

HiI just bought Cisco RV220W router, and i have some problems connecting VLANs.I have 2 vlans on my network. Now i would like to leave those 2 vlans seperate, so that nobody can go from one vlan to another.But i want 3 exceptions. 1.) access from VLA...

I'm currently experiencing problems where my router just reboots.I've tried with 4 different routers so far, 2 of them being the WRV210, a 861W and a cheap unknown brand router that was lying around in my basement.All of them do the same thing: start...

Hi.  I am seeking advice on how to configure our network for best performance.Background is that I have just joined a group of non-techie workers in a 4k sq ft office, there are currently only 3 other people here.  We "inherited" an existing network ...

Hello!I want to use a RV042 VPN Router within my network. The clients can establish a VPN connection to the RV042 (they can ping the RV042 and access webgui) but can't get access to the Storage server.The network:<client1> ------- (VPN via QuickVPN) ...

Here's my current setup:Cisco 4948 switch connected to a Linksys SRW2008 switch to a AmiNET125 and laptops.  Basically, here's what I'm trying to accomplish... on my Cisco switch I have 3 VLANs:  10, 20, and 100.  10 is my Management/Data VLAN, 20 ru...

How y'all are?I'm attempting to configure remote management (and, sometime soon, SNMP) for a newly-deployed WRVS4400N v.2.At the Basic Settings page, I enabled Remote Management, and left the port # at the default. Remotely I entered the public (stat...

I have obtained some of the 527W-U devices and I've noticed a strange change to IKE policies and IPSEC policies on this version of the product.On the previous model SRP routers, IKE policies could be used by multiple IPSEC policies, but on this versi...

I'm having a bit of trouble with the site-to-site VPN on several SRP527W's. They connect OK, but the connection always fails eventually and does not attempt to reconnect. The DSL lines are new, and they too seem a little tempramental at the moment. W...

Hello.I have problem with bandwidth management on my RVS4000.That is the way how i done it:All traffic (TCP & UDP on all ports)IP range 192.168.0.2 - 192.168.0.2 (My IP adress)Guaranted download speed 1kbpsMaximum download speed 5000kbpsafter saving ...

Is this a correct set up ?I have a RV042 router to which 4 clients are connecting.I have set up 1 tunnel only with Local Group Setup as IP address + domain name (I have a fixed IP address).IP Address is 192.168.2.0 and subnet 255.255.255.0 (I have a ...

I have replaced my old router with a RV042. I have a 3 com wireless access point that worked fine with the old router but has no internet access on the RV042. I can access the WAP and devices log in as before. I can see the devices, i.e. Ipad in the ...

Currently i am having a scenario where i have setup RV042 and  which is connected to Microsoft Forefront 2010. PPTP works fine only on  rv042 subnet but i am not able to access the "internal" network of TMG.RV042 (172.16.1.1) ---> TMG [external] (172...

We have 3 Cisco RV042. These were purchased to permit VPN from  two branch offices to our head office. VPN is required to permit the two  branch offices to use Avaya IP phones to connect to our main head  office switchboard.We also have users on Blac...