Hello forum
I have a problem with my cisco RV082 router to configure it to send SNMP traps to a SNMP server locally but do not see any traffic reaching the server snmp, set up a sniffer and monitoring traffic on the server and nothing, any suggestions?
Configuration of the router:
LAN IP 192.168.9.3/24
SNMP configuration
Get snmp comunity name: ciscorouter
Set snmp comunity name: ciscorouter
Trap comunity name: ciscorouter
send snmp trap to: 192.168.9.129
2.0.0.19.tm router firmware
I can connect to the router with snmp as well from the router I can ping to snmp server (192.168.9.129) the problem only arises because the router does not send any trap to the server.
thanks
Ricardo