Routers - Small Business

FW = 1.1.0.1PPTP = enabledserver IP = 192.168.0.1pptp range = 192.168.0.90-94 (DHCP range starts at .100)MPPE = offNetbios = offPPTP user = created and enabledPassthru = all enabledComing in from work, can ssh to server inside, so basic setup and por...

I am trying to setup a VPN using an RV042 (fw ver: 1.3.12.6) to access a VISTA computer over the internet using a laptop using QVPN's latest version. I finally got it to connect but then hang's with error " Gateway is not responding, do you want to w...

What can be responsible for this?Bisi

Hi,I've just upgraded to one of these and everything appears to be working ok - except inbound http & ssh. I have two connections to the internet using the WAN interface and ADSL2. I have load balancing enabled and some rules to route outgoing traffi...

Does anyone have Quick VPN working with the RV110W?  I have setup the Quick VPN per the instructions.  I have the latest FW (1.1.0.9) and Quick VPN client (1.4.2.1).  I have a QuickVPN username/password setup on VPN screen under the VPN Client Settin...

RSV 4000 bundle with IPSECVPN.  Any additional license for IPSECVPN ? Please advice.

I have a RV042 and I want to tell it to allow certain IPs to use WAN1 and others to use WAN2.  How do I do this?

Cisco Rv042 (obtain an ip automatically) problam ?,Firmware Version : v4.1.0.02-tm (Sep 16 2011 18:40:48)  DHCP Server Working, but Cisco Rv042 can't obtain an ip address autimatically on WAN Ports,Please Help me,Thnx

I am wondering if we can collectively comment on the need for IP range content filtering/access restrictions on the small business routers.I was thinking that the functionality would be similar to the WRT610n, in terms of filtering, but the applicati...

Hello forum I have a problem with my cisco RV082 router to configure it to send SNMP traps to a SNMP server locally but do not see any traffic reaching the server snmp, set up a sniffer and monitoring traffic on the server and nothing, any suggestion...

Hi,I have an RV 120W router with the latest firmware (1.0.2.6) that acts as a DHCP server and that provides this service and wireless internet access just perfectly.  However, my WPSM54G print server (firmware 1019) has its connection dropped after 5...

I recently took over at a company as IT Manager.  All through my career I have heard about the quality of Cisco equipment.  Over the past few years I have used a few different Cisco products with good success.  When I took over they were using an ass...

Background: For the longest time we were running Websense for web filtering.  We had one central server for the filtering and IOS 8.2.1 was the latest rev of the IOS that was stable and quick.  Within the past 6 months we've transitioned off of Webse...

Hi, I try to establish a PPTP connection from my RVS4000 (as client) to a VPN gateway. The RVS4000 is behind another RVS4000 which connects by PPPOE with the local internet provider. The PPTP connection cannot be established. I have set the second ro...