03-16-2020 02:40 PM
Hello
My VLAN1 config is like below:
192.168.17.1/24
DHCP Server: 192.168.17.100-192.168.17.149
and my SSL VPN pool is:
10.0.0.0/24
How to allow SSL VPN user to access to remote VLAN?
Thanks in advance
LK
03-16-2020 02:47 PM
you need to have access rule allow from source 10.0.0.0/24 to your LAN IP address range to allow. ( but i have not tested, there is also forum reported having issue with some Firmware specfic).
03-17-2020 12:18 PM - edited 03-17-2020 12:59 PM
It doesn't work even if I disable Firewall, so I think that its not about ACL.
Maybe I am wrong?
EDIT:
I have done some checking and there is something strange.
Looks like I can't ping for example Cisco switch SG-250 (192.168.17.2) and other network hardware like kind of TP-LINK AP with static IP (192.168.17.5) and I can't ping workstations (but it can be because of firewall and I will check it) but I CAN ping other stuff like Hikvision NVR and Cisco SPA112... weird for me. Any idea anyone?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide