How to allow SSL VPN client to access remote VLAN (RV340)?

[LechK]

Hello

My VLAN1 config is like below:

192.168.17.1/24
DHCP Server: 192.168.17.100-192.168.17.149

and my SSL VPN pool is:

10.0.0.0/24

How to allow SSL VPN user to access to remote VLAN?

Thanks in advance
LK

[balaji.bandi]

you need to have access rule allow from source 10.0.0.0/24 to your LAN IP address range to allow. ( but i have not tested, there is also forum reported having issue with some Firmware specfic).

https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb5519-configure-secure-sockets-layer-virtual-private-network-ssl-v.html

[LechK]

It doesn't work even if I disable Firewall, so I think that its not about ACL.

Maybe I am wrong?

EDIT:

I have done some checking and there is something strange.

Looks like I can't ping for example Cisco switch SG-250 (192.168.17.2) and other network hardware like kind of TP-LINK AP with static IP (192.168.17.5) and I can't ping workstations (but it can be because of firewall and I will check it) but I CAN ping other stuff like Hikvision NVR and Cisco SPA112... weird for me. Any idea anyone?