Currently in place ISP WISP Point to Point network would like some pointers to exceed in doing it right.
Anyone would like to help. Here are some issues.
ISP Fiber 50 Megs down and 50 Megs up ( Working )
What Router do I use? Looking at Cisco RVS4000 at JDT Site as main router
I have routers at others towers using the 10.1.19.xxx address as wans setup.
Do I pull out all routers and use only one from the JDT Site?
a. Due to Port forwarding
b. Lets say main Wan is 74.144.55.159 Lan 10.1.19.1
1. Site BTT router is assign address 10.1.19.33 Lan 192.168.6.1
a. Can I setup 74.144.55.159:85 to see 10.1.19.33?
My Point ot Point radio use different IP address to separate from lan address (10.1.19.xxx) Radios (10.1.119.xxx)
1. Everything is working just want to re-design everything never thought I would grow this fast with in 2 years.
Hope I explain this well enought. 90% of users are out in the country without high speed internet.