06-26-2022 05:39 PM
How on earth do we get 1:1 NAT working with the RV345P?? After port forwarding is setup do I have create access rules?
06-26-2022 06:05 PM
Hi
Use static NAT
06-27-2022 03:22 AM
Do you have Public IP range, or you have only 1 IP address provided by ISP ?
Make sure you also check the BLOCK Wan request (enable check box remove that to work) -
06-27-2022 07:38 AM
Hi,
- block wan requests is ENABLED (checked)
- Static NAT table: 192.168.1.114 - 206.248.***.*** Range Length 1 Services (ALL SERVICES) WAN Interface: WAN 2
Have quite a few services setup. In my opinion this is a STATIC NAT configuration. Should we add each of services on it's own line and specific the service, like this:
- Static NAT table: 192.168.1.114 - 206.248.***.*** Range Length 1 Services (Service A) WAN Interface: WAN 2
- Static NAT table: 192.168.1.114 - 206.248.***.*** Range Length 1 Services (Service B) WAN Interface: WAN 2
- Static NAT table: 192.168.1.114 - 206.248.***.*** Range Length 1 Services (Service C) WAN Interface: WAN 2
- Static NAT table: 192.168.1.114 - 206.248.***.*** Range Length 1 Services (Service D) WAN Interface: WAN 2
06-27-2022 09:17 AM - edited 06-27-2022 09:19 AM
I am sure you can do Service management - this few ports like 10-20 i will add manually.
06-27-2022 12:05 PM
Services have been added manually and forwarded accordingly.
My question is to accomplish 1:1 NAT, on the RV345P: Firewall > STATIC NAT, should I add each of the services individually for 1:1 NAT? As is stands I have ALL SERVICES between PUBLIC and PRIVATE. Should I add individual entries for each service???
06-28-2022 02:51 AM
That is what i have directed you with the picture :
1. as per i know, you can do range ports
2. I do not see any grouping Services.in one services group.
If range not work for you, then you need to do manually each services(becauuse of the limitration)
Hope that clears.
07-18-2022 05:23 AM
Below document is not making sense for you??
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide