RV016 and WAP321 with a guest network

[John McArthur]

I have two Cisco WAP321 AP's and a Cisco RV016 Router. 

I use the RV016 as the DHCP server for the network. 

I  would like to use the guest SSID mapped to a VLAN to issolate it from the rest of the network. 

How do I setup the  RV016 to route traffic from both the guest VLAN and the internal VLAN to  the internet while still using it as a DHCP server.

Thanks for any assistance.

John McArthur

[sirblabla]

I also would like to hear the answer :) (bump!)

[Tom Watts · Accepted solution]

Hi, this is basically an unsupported configuration. The RV016 supports only port based VLAN and only 1 DHCP scope. If you want a guest VLAN inconjunction with the router something like a layer 3 switch would need to be implemented between the router and AP to accomadate this configuration.