05-06-2019 01:06 AM
We want to restrict remote web access to our RV134W, but even though configured and reloaded still can access from anywhere, also Only need one IP but not able to just put one in the config
see enclosed
05-06-2019 01:06 AM
05-06-2019 02:03 AM
Since you are allowing from internet, for security point of view always enable https from remote management, http is not good and not secure.
here is the video for your reference
https://www.youtube.com/watch?v=9R0Rd5bS1W8
Also check any Access rules you have which is stopping from remote connection, check the logs it will give intication.
05-06-2019 03:15 AM
05-06-2019 03:57 AM
For testing, select Any IP address.
Use your Public site IP address and see you have connection. or try using simple telnet x.x.x.x 80
if this opens then your ISP allowing incoming http connection. if not iam sure something blocking from remote end to RV.
05-06-2019 04:15 AM
BB
you are not seeing my problem.
MY problem is I can access the router from any address, even though I have setup to only access from certain IPs
05-06-2019 04:58 AM
Appologies, i may be miss interpreted your issue, I was in impression that having issue with access, But i can see now you have access to every one even though you have added IP address to give only access to specific devices.
Agreed it should work as expected, let me look any bug or faults found on this version, since i do not have in hand RV to test this now.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide