05-08-2014 12:24 AM
Hi,
I am getting this problem when trying to connect to ipsec vpn
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] INFO: Received attribute type "ISAKMP_CFG_REPLY" from 46.135.70.24[32684]
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] INFO: Login succeeded for user "admin"
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] INFO: XAuthUser admin Logged In from IP Address 46.135.70.24
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] INFO: Received attribute type "ISAKMP_CFG_REQUEST" from 46.135.70.24[32684]
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] ERROR: Local configuration for 46.135.70.24[32684] does not have mode config
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] ERROR: Local configuration for 46.135.70.24[32684] does not have mode config
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] ERROR: Local configuration for 46.135.70.24[32684] does not have mode config
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] ERROR: Local configuration for 46.135.70.24[32684] does not have mode config
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] ERROR: Local configuration for 46.135.70.24[32684] does not have mode config
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] ERROR: Local configuration for 46.135.70.24[32684] does not have mode config
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] ERROR: Local configuration for 46.135.70.24[32684] does not have mode config
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] ERROR: Local configuration for 46.135.70.24[32684] does not have mode config
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] WARNING: Ignored attribute 28678
Thu May 08 08:10:09 2014 (GMT +0100): [routerBB9298] [IKE] INFO: Sending Informational Exchange: notify payload[10381]
Does anyone have idea what is wrong? What means this Local configuration for 46.135.70.24[32684] does not have mode config?
View:
Selected IKE Policy View | ||
General | ||
Policy Name | xxxxxxx | |
Direction / Type | Both | |
Exchange Mode | Aggresive | |
Enable XAUTH Client | ||
Local Identification | ||
Identifier Type | FQDN | |
FQDN | local.com | |
Peer IKE Identification | ||
Identifier Type | FQDN | |
FQDN | remote.com | |
IKE SA Parameters | ||
Encryption Algorithm | 3DES | |
Authentication Algorithm | SHA-1 | |
Authentication Method | Pre-Shared Key | |
Pre-Shared Key | xxxxxxxx | |
Diffie-Hellman (DH) Group | Group 2 (1024bit ) | |
SA-Lifetime | 28800 Seconds |
Thank you in advance
Peter
05-10-2014 08:07 PM
I found that ipsec doesn't work because the IP of the phone is always changing. Try using the PPTP option and see if that works.
05-15-2014 05:17 PM
Hi Samir,
Yes pptp is no problem. But i wanted ipsec :(
05-16-2014 07:37 AM
Ipsec won't work because of the IP address issue. Sorry. :(
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide