12-24-2013 03:21 AM
hi, i need know if the RV320 accept two or more IP for one WAN Port, in other words, i need configure this:
WAN1 --> IP xxx.xxx.xxx in Vlan 120 (Internet connection)
WAN1 --> IP xxx.xxx.xxx in Vlan 20 (VPN Connection)
WAN2 --> IP xxx.xxx.xxx (Internet Failover)
that is possible with RV320?
sorry for my bad English.
Melhores cumprimentos - Best regards - Cordialement - Mit besten Grüßen – Saludos cordiales - مع أطيب التحيات - 最好的问候 | |
Eng. Victor Parada IT Manager | Depto. IT support@omnisantos.com | M: +351 910 335 993 | Skype: viktorfreire | In: http://pt.linkedin.com/pub/victor-manuel-freire-parada/4b/109/a3b/pt Rua Almirante Gago Coutinho n.º 277, 2670-641 | |
| |
P Tenha o ambiente em consideração: Antes de imprimir este e-mail, verifique se necessita da impressão! |
12-25-2013 05:17 AM
Hi Victor
RV320's multiple public addresses are mainly for static NAT. If you want WAN carries different vlan tags (sub-interface?), you can use RV315W.
12-25-2013 10:07 AM
I do not understand.
My question is simple, can configure in the same WAN Port 2 Static IP, one in the 120 VLAN and other in 20 VLAN???
12-28-2013 01:27 AM
Victor,
What Zhaogiang is trying to say is that the RV320 can do:
- WAN IP > Internal IP (as many as you want)
but it cannot do WAN IP > Internal IP Separate VLAN.
01-14-2014 05:10 AM
thanks for your help.
now, which model do you recommend to do this job?
01-21-2014 04:57 AM
guys the Cisco 1941/k9 is good for my project?
01-21-2014 04:05 PM
Hi, Victor,
Cisco Small Bussiness routers do not support this type of configuration.
The 1900 series routers are part of entreprise, for further assistance, please call 1-866-425-5351.
Regards,
Marcelo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide