02-02-2019 03:46 AM
SNMP Seems to be broken after updating the Firmware to 1.0.02.16 from 10.0.01.20
Before the WAN Bytes in and out MIBs where:
WAN 1
1.3.6.1.2.1.31.1.1.1.6.5
1.3.6.1.2.1.31.1.1.1.10.5
WAN2
1.3.6.1.2.1.31.1.1.1.6.6
1.3.6.1.2.1.31.1.1.1.10.6
These no longer seem to exist after the update.
I found these but they show the same for in and out!
ifInOctets.30 2311274545 Counter32 192.168.0.1:161
ifInOctets.31 0 Counter32 192.168.0.1:161
ifInOctets.32 2350608743 Counter32 192.168.0.1:161
ifInOctets.33 194002918 Counter32 192.168.0.1:161
ifInOctets.34 171552629 Counter32 192.168.0.1:161
ifOutOctets.30 2311274545 Counter32 192.168.0.1:161
ifOutOctets.31 0 Counter32 192.168.0.1:161
ifOutOctets.32 2350608743 Counter32 192.168.0.1:161
ifOutOctets.33 194002918 Counter32 192.168.0.1:161
ifOutOctets.34 171552629 Counter32 192.168.0.1:161
06-23-2019 10:36 AM
06-23-2019 11:56 AM
06-23-2019 01:30 PM
Disappointed indeed.
Well, I opened a case at Cisco, an engineer is assigned and it seems the case will be "escalated"...
Let's see, keep you informed if I have any news.
In my next maintenance window, I'll downgrade the firmware.
06-24-2019 12:22 AM
06-24-2019 06:02 AM
Good to know, no downgrade then...
06-25-2019 06:16 AM
Got an e-mail now, they acknowledge the problem and escalated, will release a new firmware!
Just don't know when.
06-25-2019 06:49 AM
09-15-2019 03:47 AM
Hello again,
FYI I have just updated my router to 1.0.03.16 and SNMP is still broken :-(
Cheers,
Ralph
09-16-2019 05:18 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide