I need some guidance on what product supports multiple subnets via an establish site-to-site connection with IPsec. I purchased a RV340 under the impression that it has this capability.
After establishing the first tunnel, i tried to establish the second (the second tunnel connects to an internal vlan) and the system does not allow me to create multiple connections to the same IP. Gives the following error.
I have verified the connections works by disabling the first tunnel and then activating the second.
I have also notice that in the site-to-site configuration there is an option for a Remote IP Type of ANY.
I cannot test this, since the router on the other side is not of the same type (I did try) and will not make a connection.
If this solves my problem, i can purchase another router of the same type. If it does work, if open the questions of, How to limit traffic or exclude other subnets ?
I have also seen this answered questioned concerning the same topic.
https://community.cisco.com/t5/small-business-routers/rv345p-multiple-subnets-in-site-to-site-vpn/td-p/3183619/page/2
if this router is able to router multiple subnets via a tunel, please let me know what i am missing. if not can someone recommend a device that will allow multiple subnets to communication via a tunnel?
Thank you for the assistance and guidance.