RV345 inter VLAN routing not working

[support.rabat]

Hello,

I have an RV345, which I am trying to configure to have 2 vlans and that all the equipment connected to vlan1 and vlan 2 can communicate with each other.

what I did as a configuration:
Vlan1: 192.168.1.1/24 (with DHCP server)
Vlan2: 192.168.2.1/24 (without DHCP server)

Both VLAN's have inter VLAN routing enabled

I connected a computer (IP in DHCP) to port 1, which I set untagged for Vlan1 and tagged for Vlan2.
the second computer (static IP 192.168.2.2) on port 2 that I configured as untagged for vlan2 and tagged for vlan1.

but the ping is failed between computer 1 and computer 2.

Do I miss something please?

[balaji.bandi · Accepted solution]

from the device are you able to ping the gateway? example :

192.168.2.2 should be able to ping 192.168.2.1

192.168.1.2 should be able to ping 192.168.1.1

if this is working, check the PC running windows has to built-in FW which may deny, so disable FW and test.

[support.rabat]

Thank you so much :)
it was FW on my pcs

[balaji.bandi · Accepted solution]

Hope it was resolved, so can we mark as resolve this please..so useful for other members.