hello!
i'm having a problem establishing a pppoe session with a 1812 router. i've tried everything i could find online, even contacted the isp (all they said was that the modem should be in bridge mode, which it is)...
debug information puts out only
Sep 30 19:51:32: padi timer expired
Sep 30 19:51:32: Sending PADI: Interface = FastEthernet1
Sep 30 19:51:32: pppoe_send_padi:
FF FF FF FF FF FF 00 16 C8 18 31 39 88 63 11 09
00 00 00 0C 01 01 00 00 01 03 00 04 85 14 0B 60 ...
show ver and show run from the router
Cisco IOS Software, C181X Software (C181X-ADVENTERPRISEK9-M), Version 12.4(15)T3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 24-Jan-08 13:05 by prod_rel_team
ROM: System Bootstrap, Version 12.3(8r)YH5, RELEASE SOFTWARE (fc1)
kronik uptime is 18 minutes
System returned to ROM by power-on
System restarted at 18:53:28 CET-SUMMER Fri Sep 30 2011
System image file is "flash:c181x-adventerprisek9-mz.124-15.T3.bin"
kronik#show run
Building configuration...
Current configuration : 5070 bytes
!
! Last configuration change at 19:09:57 CET-SUM Fri Sep 30 2011
! NVRAM config last updated at 19:11:18 CET-SUM Fri Sep 30 2011
!
version 12.4
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
!
hostname kronik
!
boot-start-marker
warm-reboot
boot-end-marker
!
security authentication failure rate 3 log
logging userinfo
logging buffered 30000
logging monitor warnings
!
no aaa new-model
clock timezone CET 1
clock summer-time CET-SUMMER recurring last Sun Mar 2:00 last Sun Oct 3:00
!
no ip gratuitous-arps
!
!
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.6.66.1 10.6.66.20
!
ip dhcp pool ###LAN###
network 10.6.66.0 255.255.255.0
default-router 10.6.66.1
dns-server 195.29.150.3 213.147.96.3 4.2.2.2
lease infinite
!
!
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
login block-for 120 attempts 3 within 30
login on-failure log
!
multilink bundle-name authenticated
!
spanning-tree vlan 1 priority 8192
spanning-tree vlan 666 priority 8192
!
archive
log config
hidekeys
!
!
!
!
bba-group pppoe global
!
!
interface FastEthernet0
no ip address
duplex auto
speed auto
no cdp enable
!
interface FastEthernet1
description ### WAN ###
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 10
no cdp enable
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
!
interface FastEthernet2
switchport access vlan 666
!
interface FastEthernet3
!
interface FastEthernet4
!
interface FastEthernet5
!
interface FastEthernet6
!
interface FastEthernet7
!
interface FastEthernet8
description ### LINK NA sw04 ###
switchport mode trunk
!
interface FastEthernet9
description ### LINK NA sw01 ###
switchport mode trunk
!
interface Vlan1
no ip address
shutdown
!
interface Vlan666
description LAN
ip address 10.6.66.1 255.255.255.0
ip helper-address 10.6.66.1
ip nat inside
ip virtual-reassembly
!
interface Dialer10
ip address negotiated
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1400
dialer pool 10
dialer-group 10
no cdp enable
ppp authentication pap chap
ppp chap hostname xxxxxx
ppp chap password xxxxxx
ppp pap sent-username xxxxxx password xxxxxx
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer10
!
!
no ip http server
ip http secure-server
ip nat inside source list NAT_ADRESE interface Dialer10 overload
!
ip access-list extended NAT_ADRESE
permit ip any any log
!
dialer-list 10 protocol ip permit
!
!
!
!
!
!
control-plane
!
alias exec s show ip int brief
alias exec r show ip route
!
line con 0
privilege level 15
logging synchronous
line aux 0
line vty 0 4
privilege level 5
logging synchronous
login local
terminal-type monitor
transport input ssh
line vty 5 15
privilege level 5
logging synchronous
login local
terminal-type monitor
transport input ssh
!
ntp master
end
i am going crayz bit by bit....
