1941 with 2 VDSL EHWICS

[markeelen]

Hi all,
Anybody know the command on the 1941 to look at the dsl stats for the ehwic interfaces? On the 1841, show dsl int ATM 0/0/0 and 0/1/0 did the trick, these commands are not available on the 1941.
Any pointers would be much appreciated.
Sent from Cisco Technical Support iPhone App

[markeelen]

Found it!
show controllers vdsl 0/1/0

Same output format on 1941 as
show dsl int atm 0/1/0 gives on 1841

Cheers
Mark

Sent from Cisco Technical Support iPhone App