2 ISP links without BGP

[carl_townshend]

Hi all

can anyonme tell me if this will work

I have a cisco asa, this connects to 2 different ISP routers not running BGP, So the addresses are different

Can I create 2 NAT statments, that hides the same source network behind both different external interfaces

then create 2 default routes to each, one with a higher AD

There is no traffic coming inbound for webservers etc so will this work?

cheers

[paolo bevilacqua]

This often asked.

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a0080950834.shtml

[Karsten Iwen]

Yes, that is a valid setup. You should add monitoring the ISP to change to the backup ISP if the first fails:

http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/route_static.html#wp1119813

Some more info on the topic:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml

http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a0080bc8549.shtml

-- 
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni