cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
430
Views
0
Helpful
2
Replies

2811 - Need specific IOS!

astroman
Level 1
Level 1

Hello all -->

I have a 2811 router, running 12.3(8)T6 (SPSERVICES). I would like to configure this router as a VPN endpoint, firewall, but I'll also need to run voice through this device as well, in the future. When I load 12.4.1a (ADVANCED SECURITY), the IOS does not recognize the 2 FXO interfaces I have installed.

I need an IOS for this device that will ultimately run firewalling, VPN, Voice and IPS. Is this possible, or can I only have one or the other?

I will cross-post to other boards...thanks in advance!

1 Accepted Solution

Accepted Solutions

tekha
Level 3
Level 3

Well obviously you would get everything working in "Advanced Enterprise Services", but I think you could settle with "Advanced IP Services".

See this PDF file. First page, lower right corner.

http://www.cisco.com/warp/public/765/tools/quickreference/isr.pdf

View solution in original post

2 Replies 2

tekha
Level 3
Level 3

Well obviously you would get everything working in "Advanced Enterprise Services", but I think you could settle with "Advanced IP Services".

See this PDF file. First page, lower right corner.

http://www.cisco.com/warp/public/765/tools/quickreference/isr.pdf

Thank you very much, I've just dl'ed Adv. IP Services.