11-14-2005 12:08 AM - edited 03-03-2019 10:57 AM
Does 2811 supports NM-8E1-IMA card? I have 2621 router with this card in use and I'd like to get 2811 and put this same card in it. Is it possible?
thanks!
Solved! Go to Solution.
11-14-2005 12:27 AM
Hello,
unfortunately, the NM-8E1-IMA card is not supported on the 2811.
Check this link and scroll down to Table 3:
Table 3. Network Modules Not Supported by Cisco 2811, Cisco 2821, and Cisco 2851 Routers
http://www.cisco.com/en/US/products/ps5854/products_qanda_item0900aecd80169bd6.shtml
Regards,
GP
11-14-2005 12:27 AM
Hello,
unfortunately, the NM-8E1-IMA card is not supported on the 2811.
Check this link and scroll down to Table 3:
Table 3. Network Modules Not Supported by Cisco 2811, Cisco 2821, and Cisco 2851 Routers
http://www.cisco.com/en/US/products/ps5854/products_qanda_item0900aecd80169bd6.shtml
Regards,
GP
11-14-2005 01:18 AM
thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide