03-07-2007 01:27 PM - edited 03-03-2019 04:04 PM
this is have a preliminary config on a cisco 2811 with one t1 wic on slot 0
and a vwic-2mft-t1 on slot 1.
i want to split slot 1 interface to
2 resite I a ordered 2 PPP circuits.
The one site on s0/0/0 we are installing an Avaya 350 gateway.
is the config for the vwic-2mft-t1 correct?
ersion 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname RTR-001
!
boot-start-marker
boot-end-marker
!
card type t1 0 1
no logging buffered
enable secret 5
!
no aaa new-model
!
resource policy
!
clock timezone PCTime -6
clock summer-time PCTime date Apr 6 2003 2:00 Oct 26 2003 2:00
no network-clock-participate wic 1
ip subnet-zero
!
!
ip cef
!
!
ip domain name domain.local
ip name-server 10.1.0.10
ip name-server 10.5.0.5
!
username XXX privilege 15 secret 5
!
controller T1 0/1/0
framing esf
linecode b8zs
channel-group 0 timeslots 24
!
controller T1 0/1/1
framing esf
linecode b8zs
channel-group 0 timeslots 24
!
class-map match-any AvayaControl
match ip dscp ef
class-map match-any AvayaVoice
match ip dscp ef
!
!
policy-map xxx-Avaya
class AvayaVoice
priority 280
class class-default
fair-queue
random-detect dscp-based
!
!
!
interface FastEthernet0/0
ip address 10.1.0.254 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 10.5.0.46 255.255.255.0
duplex auto
speed auto
!
interface Serial0/0/0
description PPP to xxx
ip address 65.x.x.x.255.255.252
encapsulation ppp
!
interface Serial0/1/0:0
description PPP to xxx
ip address 65.x.x.1 255.255.255.252
encapsulation ppp
!
interface Serial0/1/1:0
description PPP to xxx
ip address 65.1.15.1 255.255.255.252
encapsulation ppp
!
router eigrp 100
network 10.0.0.0
no auto-summary
!
ip classless
ip route 10.1.11.254 255.255.255.255 Serial0/0/0 permanent
!
ip http server
!
!
control-plane
!
!
line con 0
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet
transport output none
!
scheduler allocate 20000 1000
!
end
Thanks for your help
03-08-2007 12:13 AM
THe config looks ok to me.
Just check the T1 frame & linecode matches with that of the service provider.
check this link
HTH
Narayan
03-09-2007 01:15 PM
In the controller config, unless you really want to use only timeslot 24, change it to
channel-group 0 timeslots 1-24
I've seen that mistake before.
HTH
Jhimye
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide