2960...software upgrade

[mkashifashraf]

Dear experts,

How can i Upgrade Catalyst 2960 switch software in rommon mode (switch:)

Right now flash is empty.

quick response is appreciated.

Regards,

[Leo Laohoo]

Xmodem Console Download Procedure Using ROMmon

http://www.cisco.com/en/US/customer/products/hw/routers/ps259/products_tech_note09186a008015bfac.shtml

Please don't forget to rate our useful posts.  Thanks.

[mkashifashraf]

Dear,

This is the procedure for Routers not for switches...i'm asking for Catalyst 2960 switch and it's rommon mode like "switch:"

Regards,

[Leo Laohoo]

It's the same process.

[mkashifashraf]

when switch is booting in rommon mode....it mentioned xmodem is enabled.

but there is no "xmodem" command available.

[Leo Laohoo]

Try the command "flash_init" before doing xmodem.

[Leo Laohoo · Accepted solution]

Recovering Catalyst Fixed Configuration Switches from a Corrupted or Missing Image

http://www.cisco.com/en/US/customer/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml

[Leo Laohoo · Accepted solution]

Hey mkashifashraf,

If the process is satisfactory, can I ask if you can mark the thread as "Answered"?

Thank you very much.