3945 Nat problem

[Lau Chun Yin]

Hi Expert,

Does 3945 support nat for SCTP ?????

[Reza Sharifi]

Hi,

If you have the right IOS and license, yes.

Have a look:

http://www.cisco.com/en/US/products/hw/switches/ps708/products_qanda_item09186a00809a7673.shtml#qa4

HTH

[Lau Chun Yin]

Hi,

Thanks for the reply.

By the way, i'm doing the NAT on my 3945 router

ip access-list extended test

permit ip host 192.168.25.29 host 203.203.203.203

deny   ip any any

ip nat inside source static 192.168.25.29 202.61.61.61 route-map test

The Layer 4 protocol should be SCTP, it seems the NAT translation is fail....

does anyone know CISCO NAT support SCTP or not ?

[johnlloyd_13]

hi,

i don't see any match and set clauses for your route map. could you post your 3945 config? Try to do as below and post the show ip nat translation | i 192.168.25.29 output as well.

ip nat inside source static 192.168.25.29 202.61.61.61

int

ip nat out

int

ip nat in