3945E license confusion with IPSLA

[telmuun1221]

Hi all,

i`m new to licensing and stuff, and i want to use IP SLA on my 3945E. if i buy security bundle, IP SLA will be enabled?

thanks,

Telmuun

[InayathUlla Sharieff]

Hi Telmuun,

For the 3945, the IP SLA services require the Data license to be

active. Please review the links below and order the DATA license.

White Paper

--------------------

http://www.cisco.com/en/US/prod/collateral/routers/ps10616/white_paper_c11_5

56985.html#wp9000798

DATA

Data features found in SP Services and Enterprise Services IOS image on ISR

1800,2800 and 3800 e.g. MPLS, BFD, RSVP ,L2VPN, L2TPv3 ,Layer 2 Local

Switching , Mobile IP, Multicast Authentication,FHRP-GLBP ,IP SLAs, PfR

,DECnet, ALPS, RSRB, BIP, DLSw+, FRAS, Token Ring ,ISL, IPX ,STUN, SNTP,

SDLC, QLLC etc.

License Ordering

--------------------------

http://www.cisco.com/en/US/prod/collateral/routers/ps10616/white_paper_c11_5

56985.html#wp9000822

http://www.cisco.com/go/license.

2-

I can help you turn on the evaluation mode of the license but it will work

for 60 days and you can get a permanent license from your reseller.

Router(config)#license boot module c3900 technology-package datak9

Please save the config and reload the router and the commands should be available now.

Here are some links that explains the licensing:

http://www.cisco.com/en/US/prod/collateral/routers/ps10616/white_paper_c11_5

56985_ps10536_Products_White_Paper.html#wp9000757

http://www.cisco.com/en/US/prod/collateral/routers/ps10537/data_sheet_c78_55

3896.html

http://www.cisco.com/web/LA/docs/pdf/Request_0006_cisco_ISR_G2_qa_c67_553891

.pdf

HTH

Regards

Inayath

Please rate useful posts and remember to mark any solved questions as answered. Thank you.

[telmuun1221]

HI Inayath

Thanks for information. Seems like Data license sure needs.

But I just contacted my friend and he has 3945E with Security+IPbase and he said he is using IPSLAs without any trouble.

and i`m wondering if security license can enable IP SLA, or how he can use IP SLAs?

please help, i`m confused in licenses.

Thanks,

Telmuun

[InayathUlla Sharieff]

Hi TElmuun,

Could you please get the following outputs from yoru collegue device:

show ver

show license

And what exact feature of IPSLA is he using.

Regards

Inayath

[telmuun1221]

Hi,

I found some documantation on www.cisco.com.

But i`m not sure if i can trust this document or not.

please take a look at it, and if anyone from Cisco see this, please explain this document and confirm me if i can trust this document or not.

http://www.cisco.com/en/US/docs/solutions/SBA/August2012/Cisco_SBA_BN_NetworkMonitoringUsingIPSLAAndPrimeLMSDeploymentGuide-Aug2012.pdf

Thanks,

Telmuun

[InayathUlla Sharieff]

Hi Telmuunn,

I dont understand what do you mean by trusting this document?

The document looks okay to me.

Regards

Inayath

[paolo bevilacqua]

First of all you do not buy "security bundle" but simply an additional license.

Second, you can enable an evalutaion license and check yourself what features gets enabled.

[brandon.cummings]

The security license and data license both enable the IPSLA feature. We just went through this same confusion a couple months ago. We found out that we only needed the sec license to enable IPSLA on our routers for what we needed.

Either data or sec works though.

Sent from Cisco Technical Support Android App

[InayathUlla Sharieff]

Okay I got this but unfortunately the thread was deleted not sure how, Anyhow its back again.

Please find the details:

The IP SLA feature is in the Data license, UC license or the security license set. Therefore, you will need to upgrade to something other than the base license.

HTH

Regards

Inayath

*********Please rate useful posts and remember to mark any solved questions as answered. Thank you.