Hi all,
we have a Cisco7206VXR with NPE-G2 2 GB RAM 256 MB FLASH.
Now there is a need of a SA-VAM2+ Module.But the Module is after Booting not "enable" and the Mesage appear:
%PA-3-NOTSUPPORTED: PA in slot2 (Unknown (type 1200)) is not supported on this image.
Please issue "show diag" in fully loaded IOS image
to get the PA's information and verify if it is supported
by this image, a newer version may be needed.
The Image is :
C7200P-IPBASE-M
Version 15.2(4)S3
c7200p-ipbase-mz.152-4.S3
Through search i find a hint to Image 12.4(4)XD. BUt this Image is not in the Download from Cisco
So i test it with: c7200p-ipbasek9-mz.124-24.T8
But the same Error
The Bootloader has no Problem with the Card.
System Bootstrap, Version 12.4(12.2r)T
Can someone help me ?