cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1103
Views
0
Helpful
0
Replies

7600 TCAM usage IPv4 / IPv6

Hi,

I have recently look at the FIB TCAM usage on a 7600 receiving bgp full view for IPv4 & IPv6 traffic :

L3 Forwarding Resources

Module              FIB TCAM usage:                     Total        Used     %Used

   1                     72 bits (IPv4, MPLS, EoM)      524288      441646     84%

                        144 bits (IP mcast, IPv6)      262144        11920      5%

                     detail:      Protocol                    Used       %Used

                                  IPv4                      439598         84%

                                  MPLS                        2048          1%

                                  EoM                            0          0%

                                  IPv6                       11913          5%

                                  IPv4 mcast                     4          1%

                                  IPv6 mcast                     3          1%

If  IPv4 subnetting continues as it goes, it seems that we will reach the  the 500k routes at the end of year 2013. So I have some questions :

Do you think that specifying 750k ipv4 routes (with  mls cef command  -- need a reload ?) and 125k ipv6 routes is a good  limit that will always fit in the 5 upcoming years (or will this routeur  be over / should I consider to split IPv6 & IPv4 peers on different  routers) ?

How do you see ipv6 subnet number growing  ?  If most AS have only one IPv6 subnet it should be OK (around 50k AS)  but if AS number continues to grow / some AS pick multiple prefix, it  could be hard to manage with this platform

Thanks !

Nicolas

0 Replies 0
Review Cisco Networking for a $25 gift card