Hello every one;
at my company we have a 7606-s router and we want to get a card with some 10Giga port using SFP+
can any one help choosing please ?
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 0 4-subslot SPA Interface Processor-400 7600-SIP-400 JAB103400Y1
2 0 4-subslot SPA Interface Processor-400 7600-SIP-400 JAB1034046Z
3 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAL09148EJ4
4 20 7600 ES+ 7600-ES+20G3CXL JAE1340KH0U
5 2 Route Switch Processor 720 (Active) RSP720-3CXL-GE JAE1405388I
6 2 Route Switch Processor 720 (Hot) RSP720-3CXL-GE SAL16052QWF
Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.5(3)S5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Wed 18-Jan-17 06:12 by prod_rel_team
ROM: System Bootstrap, Version 12.2(33r)SRD5, RELEASE SOFTWARE (fc1)
BOOTLDR: Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.5(3)S5, RELEASE SOFTWARE (fc1)
core1-ca1.alg.icosnet.net uptime is 11 weeks, 4 days, 1 hour, 47 minutes
Uptime for this control processor is 11 weeks, 4 days, 1 hour, 40 minutes
System returned to ROM by reload (SP by reload)
System restarted at 14:47:50 ALG Wed Nov 22 2017
System image file is "sup-bootdisk:c7600rsp72043-adventerprisek9-mz.155-3.S5.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
Cisco CISCO7606-S (M8500) processor (revision 2.0) with 3670016K/262144K bytes of memory.
Processor board ID FXS1802Q07A
CPU: MPC8548_E, Version: 2.0, (0x80390020)
CORE: E500, Version: 2.0, (0x80210020)
CPU:1200MHz, CCB:400MHz, DDR:200MHz,
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
Last reset from power-on
2 SIP-400 controllers (13 POS)(1 Channelized OC12/STM-4).
1 Virtual Ethernet interface
48 Gigabit Ethernet interfaces
13 Packet over SONET interfaces
1 Channelized OC12 interface
3964K bytes of non-volatile configuration memory.
507024K bytes of Internal ATA PCMCIA card (Sector size 512 bytes).
Configuration register is 0x2102
There is (WS-X6704-10GE). This module supports XenPac optics which is SC-type connector and not LC.
So, it does not support SFP+.
see figure-2-31 in this link
the "WS-X6704-10GE" seem to be an old card, we are lookin for somthing recent and supporting SFP+ modules.
is ther any other card with 10 Giga port for 7606-s ?