9000 Series Stacking

[Jeff Horton]

Can I stack a 9300-24U with a 9500-16X?

Thanks...

[Leo Laohoo]

Not physically possible.

[balaji.bandi]

Sackwise Virtual possible look at the best guide.

https://www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-9000/nb-06-cat-9k-stack-wp-cte-en.pdf

[Leo Laohoo · Accepted solution]

---

@balaji.bandi wrote:

Sackwise Virtual possible look at the best guide. 

---

Cannot stack (virtual or not) 9300 & 9500.  Cisco won't allow that to happen.

[balaji.bandi]

@Leo Laohoo appologies, i miss read the number, sorry different models not supported. thank you.

[Leo Laohoo]

---

@balaji.bandi wrote:

@Leo Laohoo appologies, i miss read the number, sorry different models not supported. thank you.

---

Apologies not required.  I make the same mistakes too.  

[Jeff Horton]

Thank you for your input to this question... The answer was what I had feared but will have to accept... Trying to come up with the best way to replace our Cisco 3850-24U and Cisco 3850-12S that are stacked together.. .Only if the 9400 series had a 2U chassis... Don't have room enough in design for a 4U...