12-21-2021 02:51 PM - edited 12-21-2021 03:14 PM
Hello
I need to configure the ACL on the router so that the routing table is not updated.
12-21-2021 03:28 PM
can you more clarify your request.
12-21-2021 03:49 PM
I have four routers, and on one of them I need to configure the access control list so that the routing table in it remains unchanged.
12-21-2021 03:46 PM
Hi @Geless ,
You can use ospf inbound filtering feature to do this. Please refer to the following documentation to learn how to use this feature.
Regards,
12-22-2021 02:44 PM - edited 12-22-2021 03:48 PM
Hello
@Geless wrote:
I have four routers, and on one of them I need to configure the access control list so that the routing table in it remains unchanged.
Are these rtrs in the same ospf area sharing the same topology database?
Regards keeping the route table the same do you mean you would like to accept the same current routes you are receiving and filter all future routes, or you would like to filter all routes and have just a default?
If you could elaborate on exactly what you want to filter and how the these ospf rtrs are connected would depend on how the filtering is applied.
12-22-2021 03:35 PM
Either filter LSA or
ospf flood-reduction feature.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide