Hello,
wondering if anyone can help ?.
trying to add the following command to my E1 controller on the above router and I get the following error message
CHPFXW01(config-controller)# pri-group timeslots 1-31 service mgcp
% Not enough DSP resources available to configure pri-group on controller E1 0/1/0
% The remaining dsp resources are enough for 0 time slots.
% For current codec complexity, 2 extra dsp(s) are required to create this voice port.
How do I add extra DSP's .....this isnt my field so i am a little lost.
Regards
Scott.