Hi experts,
We have a POS port going to our upstream provider. Recently we've noticed lots of errors on the port. We've tried changing the sfp and line cards to no avail. We have contacted our upstream provider, but they found nothing on there end...
Could it be a clocking issue?
See below logs:
Mar 22 12:58:31 SCT: %SONET-4-ALARM: POS3/0/1: PAIS declared
Mar 22 12:58:32 SCT: %SONET-4-ALARM: POS3/0/1: B3 declared
Mar 22 12:58:41 SCT: %LINEPROTO-5-UPDOWN: Line protocol on Interface POS3/0/1, changed state to down
Mar 22 12:58:42 SCT: %SONET-4-ALARM: POS3/0/1: B3 cleared
Mar 22 12:58:43 SCT: %SONET-4-ALARM: POS3/0/1: PAIS cleared
Mar 22 12:59:03 SCT: %LINEPROTO-5-UPDOWN: Line protocol on Interface POS3/0/1, changed state to up
Mar 22 13:03:32 SCT: %SONET-4-ALARM: POS3/0/1: PRDI declared
Mar 22 13:03:43 SCT: %SONET-4-ALARM: POS3/0/1: PRDI cleared
Mar 22 18:07:03 SCT: %SONET-4-ALARM: POS3/0/1: PRDI declared
Mar 22 18:07:03 SCT: %SONET-4-ALARM: POS3/0/1: B3 declared
Mar 22 18:07:04 SCT: %SONET-4-ALARM: POS3/0/1: PAIS declared
Mar 22 18:07:13 SCT: %SONET-4-ALARM: POS3/0/1: B3 cleared
Mar 22 18:07:15 SCT: %SONET-4-ALARM: POS3/0/1: PAIS cleared
Mar 22 18:07:16 SCT: %SONET-4-ALARM: POS3/0/1: PRDI cleared
Mar 22 18:07:24 SCT: %LINEPROTO-5-UPDOWN: Line protocol on Interface POS3/0/1, changed state to down
Mar 22 18:07:45 SCT: %LINEPROTO-5-UPDOWN: Line protocol on Interface POS3/0/1, changed state to up
Mar 23 14:36:36 SCT: %SONET-4-ALARM: POS3/0/1: PAIS declared
Mar 23 14:37:06 SCT: %SONET-4-ALARM: POS3/0/1: B3 declared
Mar 23 14:37:07 SCT: %LINEPROTO-5-UPDOWN: Line protocol on Interface POS3/0/1, changed state to down
Mar 23 14:37:16 SCT: %SONET-4-ALARM: POS3/0/1: B3 cleared
Mar 23 14:37:17 SCT: %SONET-4-ALARM: POS3/0/1: PAIS cleared
Mar 23 14:37:28 SCT: %LINEPROTO-5-UPDOWN: Line protocol on Interface POS3/0/1, changed state to up
Thanks to advise.
Regards Steve
