08-26-2011 12:14 AM - edited 03-04-2019 01:25 PM
Hello
I'm hoping someone can offer some good advice to this problem I'm having. We have a cisco 2800 router and are now required to allow users to be able to connect to another company's extranet. Having tried this it wont allow this connection so I have added this to the access-list 101
access-list 101 remark SDM_ACL Category=0
access-list 101 permit ip any host 192.168.0.246
access-list 101 permit ip any host 192.168.0.247
access-list 101 permit ip any host 192.168.0.47
access-list 101 permit tcp any any eq 1723
access-list 101 permit gre any any
I dont think the gre is being allowed back in. I have attached a cut down copy of the config to see if anyone can assist. I have just general experience of cisco routers and not cisco qualified. Any assistance will be greatly appreciated.
08-26-2011 12:06 PM
I don't see any crytpo configuration anywhere. You need crypto configuration for an IPSec VPN.
Please refer to this document to get you started:
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080194650.shtml
Regards,
Edison
09-01-2011 03:39 AM
Thanks for your reply Edison its much appreciated I am attaching the full config file as I had chopped it down. If you get chance to have a look I would like to hear your opinion on the full config. Or if You can advise me how to troubleshoot where the VPN traffic is getting stopped and how I might be able to resolve this issue. Manky thanks in advance.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide