Any Connect VPN issues with ASA 5505 Ver 8.2.5

[s.thakker]

Hello, I am having this issue with ASA 5505 Ver 8.2.5

I can connect to asa using vpn 3.1.xx get an ip address and shows as connected

But I can not access any resources on the remote site.

I know that I need split tunnel and is already in place.

I have no nat created between internal and vpn pool

Here is my info

Internal IP 192.168.80.0/23     VPN Pool IP 192.168.99.0/24

I have quite a few L2L vpn tunnels and they all work fine without any problems

I have attached my Running Config file and some of the screen shot from my machine when I am connected. I am completely lost. Can someone help me please?

[Abhijeet Kumar]

Can you post the webvpn configuration please (no running config). Please send the output of below:

- show running-config | grep webvpn

- show run nat (the nat statement for webvpn)

- show run access-list (the access-list for webvpn)

- vpn pool

Thank you

[Georg Pauwen]

Hello,

at first glance, your no_nat access list is missing a few lines (VPN pool to internal networks). Can you add the below and check if that makes a difference ?

access-list no_nat extended permit ip 192.168.99.0 255.255.255.0 192.168.80.0 255.255.254.0

access-list no_nat extended permit ip 192.168.99.0 255.255.255.0 192.168.254.0 255.255.255.0 

access-list no_nat extended permit ip 192.168.254.0 255.255.255.0 192.168.99.0 255.255.255.0