12-21-2022 06:12 AM
Hi All,
I'm configuring a cisco ASR 1000 and when I attempt to do reload I get below error :
WARNING:
Boot variable either does not exist or buffer is too small This may impact autoboot of the router. Proceed with caution
Do you want to proceed?[confirm]n
when I do show boot I get the below:
BOOT variable does not exist
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
Configuration register is 0x2102
Standby not ready to show bootvar
I haven't restarted the router out of caution. Would appreciate any thoughts on how to deal with this.
Thanks
12-21-2022 06:20 AM
check from prompt
#dir bootflash:
you will see .bin file example ( asr1000-universalk9.XX.XX.XX.SPA.bin)
note that file name and config as below :
config t
!
boot system flash bootflash:/asr1000-universalk9.XX.xx.xx.SPA.bin
!
end
then check show boot you see the boot information (if all ok)
write the config and reload
10-14-2023 05:49 AM
Thanks mate. That solve my issues
10-14-2023 06:30 AM
Glad it help to resolved the issue and all good, we mark as resolved now.
02-25-2024 04:58 PM
Hi Balaj
I am having this same error. When I followed same resolution steps. It has not helped.
Can you please guide me ? where i am doing wrong. thanks
WARNING:
Boot variable either does not exist or buffer is too small
This may impact autoboot of the router. Proceed with caution
Do you wish to proceed with reload anyway[confirm]
I am sharing the results of dir bootflash:
dir bootflash:
Directory of bootflash:/
32065 drwx 32768 Feb 26 2024 11:51:24 +11:00 tracelogs
28 -rw- 13484 Feb 13 2024 16:26:17 +11:00 configbackup-Feb-13-16-26-17.720-19
27 -rw- 13236 Feb 9 2024 11:41:47 +11:00 configbackup-Feb--9-11-41-47.638-18
26 -rw- 13236 Feb 9 2024 11:38:32 +11:00 configbackup-Feb--9-11-38-32.484-17
80161 drwx 4096 Jan 2 2024 13:26:44 +11:00 .installer
48097 drwx 4096 Jan 2 2024 13:26:25 +11:00 license_evlog
19 -rw- 656 Jan 2 2024 13:26:23 +11:00 vlan.dat
16 -rw- 30 Jan 2 2024 13:26:11 +11:00 throughput_monitor_params
12 -rw- 134458 Jan 2 2024 13:25:42 +11:00 memleak.tcl
11 -rw- 2820 Jan 2 2024 13:25:14 +11:00 mode_event_log
25 -rw- 13305 Oct 9 2023 14:33:33 +11:00 configbackup-Oct--9-14-33-33.160-16
24 -rw- 13295 Oct 9 2023 14:32:47 +11:00 configbackup-Oct--9-14-32-47.153-15
23 -rw- 13226 Oct 9 2023 11:45:20 +11:00 configbackup-Oct--9-11-45-20.300-14
22 -rw- 13318 Aug 31 2023 11:14:09 +10:00 configbackup-Aug-31-11-14-09.316-13
21 -rw- 13308 Aug 31 2023 11:11:53 +10:00 configbackup-Aug-31-11-11-53.076-12
20 -rw- 13396 Aug 31 2023 10:46:20 +10:00 configbackup-Aug-31-10-46-19.872-11
30 -rw- 13372 Aug 31 2023 10:40:56 +10:00 configbackup-Aug-31-10-40-56.444-10
112225 drwx 4096 Aug 4 2023 12:54:27 +10:00 .prst_sync
128257 drwx 4096 Aug 4 2023 12:48:11 +10:00 .dbpersist
104209 drwx 4096 Aug 4 2023 12:43:05 +10:00 pnp-tech
18 drwx 4096 Jul 27 2023 12:54:15 +10:00 lost+found
17 -rw- 604115200 Jan 15 2023 05:18:31 +11:00 c1100-universalk9.17.03.04a.SPA.bin
72145 drwx 4096 Jan 15 2023 05:09:38 +11:00 iox_host_data_share
8017 drwx 4096 Jan 15 2023 05:09:27 +11:00 .attrib
56113 drwx 4096 Jan 15 2023 05:09:18 +11:00 guest-share
16033 drwx 4096 Jan 15 2023 05:08:55 +11:00 core
40081 drwx 4096 Jan 15 2023 05:08:52 +11:00 onep
136273 drwx 4096 Jan 15 2023 05:08:49 +11:00 pnp-info
168337 drwx 4096 Jan 15 2023 05:08:09 +11:00 virtual-instance
14 -rwx 1314 Jan 15 2023 05:08:02 +11:00 trustidrootx3_ca.ca
13 -rw- 20109 Jan 15 2023 05:08:02 +11:00 ios_core.p7b
24049 drwx 4096 Jan 15 2023 05:07:50 +11:00 gs_script
152305 drwx 4096 Jan 15 2023 05:07:28 +11:00 .rollback_timer
sh boot
BOOT variable =
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
Configuration register is 0x2102
Standby not ready to show bootvar
02-26-2024 08:30 AM
the config we provided for Router :
what device moel you having issue ?
as per the bin file it is c1100-universalk9.17.03.04a.SPA.bin - so above proceedure should work.
12-21-2022 02:18 PM
Post the complete output to the command "dir".
Cisco ISR & ASR 1k Routers: IOS-XE/Firmware Upgrade (Install Mode)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide