ASR 1002-X HRSP Object Tracking

[Steve Coady]

Hello

I have the following config in place. I want to make sure my HSRP is tracking to be affective.

Please review and advise.

track 1 ip route (ISP PER ip address) 255.255.255.252 reachability

interface GigabitEthernet0/0/5
 description Inside_DMZ_3750
 ip address 10.27.254.3 255.255.255.0
 standby 1 ip 10.27.254.1
 standby 1 priority 150
 standby 1 preempt
 standby 2 ip 10.27.254.2
 standby 2 priority 90
 standby 2 preempt
 speed 1000
 no negotiation auto

I have tried to add standby track 1 statements to HSRP config, however they do not show in display.

   standby 1 track 1 ?

   standby track 1 ?

[Steve Coady]

Hello

can anyone provide some expert guidance on this issue?

[Steve Coady]

1 more question

I am using this track command "track 1 ip route 1.1.1.9 255.255.255.252 reachability

is there anything else I should add to this:

ASR1002x(config-track)#?
Tracking instance configuration commands:
  default  Set a command to its defaults
  delay    Tracking delay
  exit     Exit from tracking configuration mode
  ip       Tracking IP configuration subcommands
  no       Negate a command or set its defaults