02-08-2022 01:06 PM - last edited on 02-08-2022 10:36 PM by Translator
Hi All,
I have an ASR 9006 that I am unable to bundle to
100G bundle-ether
.
I have tried the following:
int bundle-ether 32 100G mtu 2012 int hu0/0/0/3 100G Port Member mtu 2012 bundle id 32 mode active bundle port-priority 32601 cdp
I get an error when I attempt to commit the changes:
interface HundredGigE0/0/0/3
bundle id 32 mode active
!!% Bundle membership configuration conflicts with underlying interface configuration (either already existing or also present in the same commit).
Conflicting: /mtu/HundredGigE
!
end
The MTUs match, so I'm not sure what the conflict it is noting is referencing.
When I did some searching, I found this: https://bst.cloudapps.cisco.com/bugsearch/bug/CSCux02557?rfs=iqvred
Solved! Go to Solution.
02-08-2022 01:11 PM
Replying with a solution - I thought I had already tried this.
I removed MTU from both the main interface as well as the bundle, then re-added the port to the bundle successfully.
Thanks!
02-08-2022 01:11 PM
Replying with a solution - I thought I had already tried this.
I removed MTU from both the main interface as well as the bundle, then re-added the port to the bundle successfully.
Thanks!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: