01-18-2021 04:03 AM
Hi,
Customer is running OTV between 2 DC’s (DC-1 & DC-2) with unicast adjacency servers located at DC-2 for approx 4 VLANS.
We now need to introduce DC-3 for a limited time which will have p2p connections to DC-1 and span the 4 VLANS between all DC’s.
Do I simply ensure there is a routed path from DC-3---DC-2 via DC-1 and configure DC-3 ASR to use the adjacency servers at DC-2 meaning there is no OTV configuration at DC-1?
Thanks in advance.
01-18-2021 04:52 AM
is this connetion you looking meshed or only you need OTV between DC3 and DC2 ??
01-18-2021 05:13 AM
Thanks for your reply.
For this situation, we actually only need OTV between DC-3 (new) to DC-1 where the new p2p circuits terminate.
I forgot to mention that the ASR's are "on a stick" and not in-line.
If a fully meshed solution was required, but would we possibly have to do different?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: