asr1001 upgrade problems
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-05-2011 01:41 PM - edited 03-04-2019 01:50 PM
folks
i'm trying to upgrade an asr1001 (r1)
from
asr1001-universal.03.02.00.S.151-1.S.bin
to
asr1001-universalk9.03.02.00.S.151-1.S.bin
i've put in the boot system flash asr1001-universalk9.03.02.00.S.151-1.S.bin command and reloaded but the box keeps loading first image
the confreg register is 0x2102
i've tried the license module command to enable adventerprise but it made no difference so i removed it again
my license is now
License Package Information for Module:'asr1001'
Module name Image level Priority Configured Valid license
asr1001 adventerprise 1 NO adventerprise
advipservices 2 NO advipservices
ipbase 3 NO ipbase
am i getting a license issue or has anyone come across this problem before?
thanks to anyone taking the time to reply
- Labels:
-
Other Routing
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-05-2011 02:12 PM
i've put in the boot system flash asr1001-universalk9.03.02.00.S.151-1.S.bin
It should be "boot system flash:asr1001-universalk9.03.02.00.S.151-1.S.bin".
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-06-2011 05:48 AM
leolaohoo
thanks for your reply
i've already tried this and its the same result
i eventually got it resolved with
boot system flash bootflash:asr1001-universalk9.03.02.00.S.151-1.S.bin
