04-22-2022 12:42 AM
i have this problem on my ASR 1002-X
19720 18557 57% 57% 57% S 295694336 mcpcc-lc-ms
the procesor cpu0 is always 45% used
sometimes all processors are used but this happens by cpp_cp_svr and the router works very slow.
Solved! Go to Solution.
04-22-2022 01:24 AM
Hello,
I did a search and came across a couple of bugs, none of which really seem to apply to your setup:
CSCvd93610
CSCuz22379
CSCvq02003
Either way, shutting down (shut) unused interfaces sometimes helps, you could give that a try.
04-22-2022 01:00 AM
Post the complete output to the following commands:
04-22-2022 01:15 AM
04-22-2022 01:24 AM
Hello,
I did a search and came across a couple of bugs, none of which really seem to apply to your setup:
CSCvd93610
CSCuz22379
CSCvq02003
Either way, shutting down (shut) unused interfaces sometimes helps, you could give that a try.
04-22-2022 02:05 AM
IOS-XE version is 16.6.1 (Bundle Mode). I'm going to start pointing at that as the root cause of the high memory utilization of the QFP.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: