ASR1002-X

[Momodou lamin Manneh]

Hello........

Still on the issue of ASR. It was configured and integrated on the production network.i have a problem of limiting  bandwidth for customers.Need help for configuring a dedicated bandwidth for customers.Example : configuring a dedicated 1Mbps for a customer.

Thanks in advance....

[Leo Laohoo]

Read THIS.

[Momodou lamin Manneh]

Hello Leo,

Thanks for sharing the page.Anyway am still trying to get it right the difference between shaping and limiting.My own issue is LIMITING traffic to the subscribe bandwidth.

ASR1002 connected to cisco 3560 this connecting all the ethernet customers.i want to apply rate limit on each sub-interface for every customers.

See two configuration sample i applied on the router for a customer connected on 10Meg but its  not working.

Policy Map policy10
    Class police
     police cir 10240000 bc 10240000 pir 10240000 be 10240000
       conform-action transmit
       exceed-action set-prec-transmit 2
       violate-action drop

int gi q/w/e.123

service-policy input policy10
 service-policy output policy10

  Policy Map police
    Class Group10
     police cir 10240000 bc 10240000 be 10240000
       conform-action transmit
       exceed-action drop
       violate-action drop

. int gi a/s/d.246

service-policy input police
 service-policy output police

Am i missing something or not doing it right.

Please help.