cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1357
Views
10
Helpful
2
Replies

ASR1006 Route Processor RP1 Boot issue

mecharek1
Level 1
Level 1

I installed a new ASR 1000-RP1 card on my ASR 1006 router but after decompressing the IOS image it displays the following message:

 

%IOSXEBOOT-4-BOOT_SRC: (rp/0): Non-HD Boot
%IOSXEBOOT-4-BOOT_ACTIVITY_LONG_TIME: (local/local): configure_sysinit_rp took: 3 seconds, expected max time 2 seconds
01/01 00:02:20.516: %CMRP-0-WANPLL_INITIALIZATION: The RP WAN PLL has failed initialization because No such device

Application has encountered fatal error, aborting: (FATAL 01/01 00:02:20.516: :MRP-0-WANPLL_INITIALIZATION: The RP WAN PLL has failed initialization because No such device

Jan 1 00:02:21.446 R0/0: %BOOT-0-APP_STARTFAILCRIT: Failed to launch a critical process cman


I changed the version of the IOS but still the same problem, to upgrade the ROMMON it is not possible from the rommon.
can someone help me knowing my support contart has expired

2 Replies 2

Leo Laohoo
Hall of Fame
Hall of Fame
The RP WAN PLL has failed initialization because No such device

Where did you get this RP1?  Looks like something is missing.  A memory card or something.

Hi Leo;

 

it purchased from a Cisco partner in packaging with a 4GB RAM and a 40Gb hard drive preinstalled,
I tried with another RAM it's the same thing.

 

Regards;

Review Cisco Networking for a $25 gift card