06-10-2008 10:16 AM - edited 03-03-2019 10:18 PM
I know this is a very naive and novice question, but I have 2 point to point T-1's that I would like to connect to the following card in a 7206 VXR:
PA-A3-8T1IMA=
Is there any confiration that will allow me to utilize this card with serial T-1's?
Solved! Go to Solution.
06-10-2008 10:23 AM
Hi,
You can use that card, but on the other side of the circuits you will need another ATM IMA interface of some kind. You cannot connect ATM IMA to non-IMA equipment directly, and there are no workarounds to that.
Hope this helps, please rate post if it does!
06-10-2008 10:23 AM
Hi,
You can use that card, but on the other side of the circuits you will need another ATM IMA interface of some kind. You cannot connect ATM IMA to non-IMA equipment directly, and there are no workarounds to that.
Hope this helps, please rate post if it does!
06-10-2008 10:24 AM
That's what I thought...hmmmm...I'll have to dig around in the parts drawer and see what I can find. Thanks.
06-10-2008 10:42 AM
You're welcome, please remember to rate useful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide