cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1083
Views
0
Helpful
2
Replies

Bad memory - wrote zero Error

nedian123
Level 1
Level 1

I have a Cisco 2524 Router while booting following Message is being displayed

"Bad memory - wrote zero, read 0xFFFFFFFF at location 0x00000010" .

What is the cause of this Problem ?

Akhtar

1 Accepted Solution

Accepted Solutions

pkhatri
Level 11
Level 11

Hi Akhtar,

You get that error message when you have a DRAM SIMM that is not seated properly in its slot. I suggest you open up the chassis and re-seat the SIMM.

The following link has more info on this:

http://www.ciscotaccc.com/core/showcase?case=K19410284

Hope that helps - pls rate the post if it does.

Paresh

View solution in original post

2 Replies 2

pkhatri
Level 11
Level 11

Hi Akhtar,

You get that error message when you have a DRAM SIMM that is not seated properly in its slot. I suggest you open up the chassis and re-seat the SIMM.

The following link has more info on this:

http://www.ciscotaccc.com/core/showcase?case=K19410284

Hope that helps - pls rate the post if it does.

Paresh

Hi Paresh,

re-seating didn't worked & possibly the SIMM was faulty, but the link was helpful.

Akhtar