Basic configuration of Cisco ASR 1002 configuration

[ashz14387]

Provide me a basic configuration of ASR 1002 router which has the following protocol active

1. DHCP

2. NAT ( PAT, DNAT, SNAT)

3. HSRP

4. ACL

5. Routing protocols like OSPF and BGP

Kindly share me the configuration for the above mentioned. Thanks in advance

[pieterh]

may I suggest you apply for a Cisco CCNA training or similar ?

[ashz14387]

Funny, i do have CCNA certification and i do know how to configure all the mentioned above and i am also sry for not providing the question that conveys my requirement. I just want to know that configuring steps involved in the above mentioned protocols is same as cisco router 7200 for Cisco ASR. 

[pieterh]

7200 IOS Version 12.x but retired
 Cisco IOS Software Release 12.4(11)T - Retirement Notification - Cisco

1002 IOS-XE version 16.x
Cisco ASR 1000 Series Aggregation Services Routers - Configuration Guides - Cisco

-> the steps will be the same
and most commands will be the same, though there will be some command differences

[ashz14387]

Thanks for the reply