Not really a routing question but not sure where to put this. We have BFD configured and I see something that is not making sense.
We have a Nexus 7K and a 3850 using a point to point link with the following configuration -
bfd interval 150 min_rx 150 multiplier 3
I thought that the min rx echo function should be negotiated as 150, as both sides are set to this. What i see is -
7K - From last packet
Min Echo interval: 150000
3850 -
Min Echo interval: 50000
This site is remote and has latency of about 51 ms on average. The link goes down alot and I am trying to work out if this is to blame.
Thanks
Brad