08-17-2021 02:27 AM
Hi Community
Is there any command to check which route-map has been used to advertise routes to an iBGP or eBGP neighbor?
Thanks in advance.
Solved! Go to Solution.
08-17-2021 04:02 AM
Hello,
in addition to Giuseppe's remarks (and I am not really sure what you are after), but you could also filter the output of 'sh run'.
In this example, the output of:
R1#sh run | include remote-as 2|route-map
would be:
neighbor 192.168.1.2 remote-as 2
neighbor 192.168.1.2 route-map RM out
route-map RM permit 10
08-17-2021 03:00 AM
Hello @IeSa50839 ,
show ip bgp neighbors
it should provide also what route filters are applied to each neighbor if any.
Alternatively you can examine the configuration.
Hope to help
Giuseppe
08-18-2021 04:13 AM
Thank you
08-17-2021 04:02 AM
Hello,
in addition to Giuseppe's remarks (and I am not really sure what you are after), but you could also filter the output of 'sh run'.
In this example, the output of:
R1#sh run | include remote-as 2|route-map
would be:
neighbor 192.168.1.2 remote-as 2
neighbor 192.168.1.2 route-map RM out
route-map RM permit 10
08-18-2021 04:13 AM
Thank you Georg
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide