BGP Question- Urgent

[vinodbharwani]

Hi Friend

I have One office & it is connected by two different ISP1 and ISP 2 ( Different AS number ), I have two 2 mb link between them. Now i want to configure traffic in such way one link use only 60 % with ISP1 and other link to IPS2 is using 40% traffic, How i can configure this ?

-V

[sirdudesly]

quality of service?

[shivlu jain]

or you can use the policy based routing. In PBR you can match the source and assign the next hop addresses.

regards

shivlu

[bvsnarayana03]

You may be having definite reasons for doin this, otherwise make full use of the pipe you are paying for. There are some QoS techniques for doing this. Rate-limiting, shaping & policing are some features.

Refer this link for understanding:

http://www.cisco.com/en/US/docs/ios/12_0/qos/configuration/guide/qcpolts.html

[Joseph W. Doherty]

For outbound, but not practical for inbound, if your routers support OER/PfR, you can configure load ratios.