03-22-2011 06:34 PM - edited 03-04-2019 11:50 AM
Pls. can you guys take a look at this lab and tell me what am missing?
I can't ping accorss from R3_AS_100 to R1_AS_200 & from R4_AS_100 to R2_AS_300
Thx.
mohamed
03-22-2011 07:00 PM
Mohamed,
from R3_AS_100 to R1_AS_200 Can you ping the physical addresses? if yes, can you ping the loopback addresses?
Is BGP peering established?
Reza
03-22-2011 07:41 PM
03-23-2011 12:27 AM
Hi,
Your route-maps are denying everything because there is the default implicit deny all at the end so you have to add on both R2 and R1:
route-map KHADR 20
Then do a route refresh: clear ip bgp * in on both routers and you should be good to go.
Regards.
Alain.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide