ANNOUNCEMENT - The community will be down for maintenace this Thursday August 13 from 12:00 AM PT to 02:00 AM PT. As a precaution save your work.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
196
Views
0
Helpful
2
Replies
Highlighted
Beginner

BGP Routing between 2 Peers

Hi,

Can we configured BGP peering as per attached network scenario.

Does BGP peering works only on single IP?

Can BGP peering works with multiple IPs?

2 REPLIES 2
Highlighted
Enthusiast

Bed time stories:

Bed time stories:

http://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/26634-bgp-toc.html?referring_site=RE&pos=4&page=http://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/23675-27.html

http://docwiki.cisco.com/wiki/Border_Gateway_Protocol

http://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13751-23.html

http://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/23675-27.html

Please rate replies and mark question as "answered" if applicable.
Highlighted
VIP Mentor

Hi,

Hi,

Yes you can create the BGP peering as you are requesting, if the peers are over the same subnet and same BGP domain you also could use peer-groups and dynamic BGP peering using: bgp listen range command to reduce the configurations lines and management otherwise you can create the peering individually using neighbor commands and their attributes:

http://www.cisco.com/c/en/us/td/docs/ios/12_2sx/12_2sxh/feature/guide/sx_bdyn.html

http://www.rogerperkin.co.uk/routing-protocols/bgp/bgp-listen-range-command/

Please rate the comment if it is useful

:-)




>> Marcar como útil o contestado, si la respuesta resolvió la duda, esto ayuda a futuras consultas de otros miembros de la comunidad. <<